| Function | Arguments | Argument Description |
| p.circle | | (maplink or mapframe output can be very large) - built from a circle center point |
| lat | Required latitude (see id below) - ie. lat=27.0 |
| long | Required longitude (see id below) - ie. long=28.0 |
| id | Wikidata ID to look up coordinates instead of using lat and long parameters |
| type | "line" or "poly" default is "line" |
| group | group name to be used as "show" argument in <mapframe> - default is "circle" |
| title | title to be used in <maplink> -- default is "A circle" |
| desc | description default is "" |
| radius | radius of a circle. - default is .5, MAX set at 10 -- and can not be less than or equal to 0 -- .00010 is about 40 meters, 3 is about 50 km |
| fill | default set to #ccef64 if missing |
| stroke | default set to #0000ff |
| mapframe | To create a mapframe insted of a maplink - use mapframe=y or mapframe=yes |
| marker | y or yes - create a marker - at input lat long |
| {{safesubst:#invoke:Mapdraw|circle|lat=22.35|long=70.07|type=poly|radius=10|fill=#000000|stroke=#0000cc}} |
|
|
